Just make sure you have the right connector gender for the various pieces.Does anybody know if I need to pinout a DB9 TO RJ45 or if I need to configure a driver.
Digi One Realport How To Do ThisPlease if anybody knows how to do this I will really appreciate it. As far as the Software side of setting it up, I havent a clue. I have never used the Digi One, but I do a lot of 355 Adapter connections. You can make an adapter of DB9F to 8 position modular jack or plug, or use a DB9-DB25 and a 355 adapter to modular jack and an 8 wire modular cord. For this example, we will refer to them as Unit A and Unit B. For Unit A - Server Side (side that receives the initial connection request): 1. Type the IP Address of the Digi One RealPort IA in the address field of your internet browser to connect to the Digi One RealPort IA. After logging in select Configure, Port. In the Device Type drop down box, change the device type to Printer. Select the appropriate baudrate, databits, parity, stopbits and flow control. Click Submit to save your settings to the Digi One. Click on the Advanced button. Click on the box next to Binary Mode, if this is a Telnet connection and binary data will be transferred through the port. NOTE: Leave blank if ASCII. Click Submit to save your changes to the Digi One RealPort (IA). Reboot the Digi One RealPort (IA) before using. For Unit B - Client Side (or side that initiates the connection): NOTE: You can autoconnect at bootup or when the unit is on (DCD is asserted), reference the appropriate configuration for your requirements (see configuration 1 or 2). Autoconnect at bootup: A. Type the IP Address of the Digi One in the address field of your internet browser to connect to the Digi One. B. After logging in select Configure, Port. NOTE: Terminal type does not matter. D. Select the appropriate baudrate, databits, parity, stopbits and flow control. NOTE: The port settings should be the same as the configuration used on the Server Side. E. Click Submit to save your settings to the Digi One. F. Click on the Advanced button and select the radio button to enable Autoconnect. F. Enter the IP Address of Unit A (Server Side) in the IP Address box. G. For the TCP Port number, you will want to accept the default value of 2001. H. Click on the box next to Force DCD to enable it. I. Click on the box next to Binary Mode, if this is a Telnet connection and binary data will be transferred through the port. J. Click Submit to save your settings to the Digi One. K. Reboot the Digi One before using. ![]() Autoconnect when Unit B is on (DCD is asserted). A. Type the IP Address of the Digi One in the address field of your internet browser to connect to the Digi One. H. Click on the box next to Binary Mode, if this is a Telnet connection and binary data will be transferred through the port. I. Click Submit to save your settings to the Digi One. J. Reboot the Digi One before using. K. You have now successfully configured your Digi One for Serial Tunneling. Digi One Realport Manuals Below ForNOTE:If you have one device that is already networked, reference Autoconnect in the manuals below for more information. Digi One Realport Serial Port OnThe CD that comes with the device will enable a new serial port on your PC that is actually a Ethernet connection. ![]() The connection to the Merlin is RJ45 to a 355AF adapter, to a 25 to 9 pin adapter, to the Digi One device, to the LAN. I have over 75 locations with this arrangement, they work great. Is there any special pinouts for any of this procedures Let me know please. This is the first time I do this so I really appreciate your help guys. Bob Ramos.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |